Welcome to the official website of Jiangsu Jiente Intelligent Technology Co., Ltd!

News

Reading
  • Huai 'an non-standard auto…

    Automation intelligent technology is widely used in industry, agriculture, military, scientific research, transportation, business, medical, service and family, etc. The use of automation technology can not only remove people from heavy physical labor

  • Jiangsu Jient intelligent Tech…

    Jiangsu Jient Intelligent Technology Co., Ltd. is located in the west of Suqian Economic Development Zone, is a high-tech enterprise engaged in industrial automation industry and design and production factory supporting. The company specializes in complete sets of engineering automation, logistics conveying equipment system, as well as factory related equipment, lift series, fixture, tool cabinet, workbench, testing table, etc. Set design, manufacturing, installation, commissioning, after-sales service as one.

  • What is an assembly line

    Assembly line is an effective combination of man and machine, the most fully reflects the flexibility of the equipment, it will transport system, accompanying fixture and online special machine, testing equipment organic combination to meet the assembly requirements of a variety of products.

  • What are the uses of assembly …

    Assembly line, widely used in meat processing industry, frozen food industry, aquatic processing industry, beverage and food, dairy processing industry, pharmaceutical, packaging, electronics, electrical appliances, auto parts, processing manufacturing, agricultural and sideline products processing industry and other industries.

  • What's the use of a contro…

    The control cabinet is mainly used for high-rise buildings without tower water supply, fire deep well pump constant pressure water supply and other occasions to adjust the pump speed in a closed loop according to the real-time water use conditions, using well-known brands of inverter, intelligent controller, pressure sensor and pump to form a closed-loop control system.

  • Control cabinet maintenance an…

    Disconnect the power supply and check whether the rack of the control cabinet is grounded, and ensure that the grounding resistance is not greater than 4 ohms.

  • What is the use of storage she…

    Three-dimensional structure, can make full use of warehouse space, improve the utilization rate of warehouse capacity, expand the storage capacity of warehouse;

  • On the importance of storage s…

    In order to promote the integrated development of China's storage shelf industry and accelerate the construction of a solid barrier to the international development of China's storage shelf industry, China's storage shelf will take the connection of market supply and demand parties as an opportunity

Huai 'an non-standard automation equipment debugging skills induction

Release time:2021/6/11 16:40:30 | Hits:1404

       Automation intelligent technology is widely used in industry, agriculture, military, scientific research, transportation, commerce, medical care, service and family, etc. The use of automation technology can not only liberate people from heavy physical labor, part of the mental work and bad, dangerous working environment, but also expand the function of human organs, greatly improve labor productivity. To enhance mankind's ability to understand and transform the world. Next, Jeent small editor will mainly talk about the debugging skills of Huaian non-standard automation equipment.

淮安非标自动化设备

       ⑴The rotating part should ensure the balance, straightness and concentricity of the rotating part to reach the precision of the swing arm and indexing.
       ⑵For the single cylinder push-pull or lifting part, it should be ensured that the pull is in place, the push is also in place, and there is no abnormal resistance. 
       ⑶Wipe and clean the parts (including standard parts and non-standard workpiece), pick out the central part of the parts, and assemble and debug the most central parts. During the assembly process, the accuracy of the installed parts should be checked to ensure the horizontal, vertical and concentricity problems. 
       ⑷Pin, card slot with pin hole and card slot should be wiped clean, select the appropriate pin (pin material hardness above 58 degrees), positioning, pin with unilateral tight fitting is the best, convenient disassembly and installation; The accuracy of the card slot should be controlled within 0.02 to ensure the accuracy of the secondary device, and the interior needs to be polished to prevent the product from scratching and scratching.
       ⑸Understand the product characteristics of Huaian non-standard automation equipment (including appearance, scale, tolerance, structure, process, etc.).
       ⑹Vibrating disk, direct vibration
       The vibration disk and the direct vibration are divided into two parts: the vibration part and the control part, the vibration part is mainly the vibration magnet, the control part is the vibration controller, the controller has the power switch button, and the voltage, frequency button, the vibration frequency is too large, the product will shake off or go back; The vibration is too small, the product moves slightly or does not move.
       ⑺A: Magnetic switch, cylinder induction is divided into front sense and rear sense, the front sensing push the front sense to the most front end of the cylinder, the cylinder stroke should also be in the front end, at this time the sensor should be in the light off condition, push the sensor from the front end to just bright is appropriate. Adjust the afterfeeling method as above. B: Optical fibers are adjusted according to different brand specifications, the operation is different but the principle is the same, pay attention to the difference between reflective fiber and optical fiber.
       ⑻Valve speed conditioning
       The speed of the valve should be the best condition without affecting the production power of just the speed of the product away, the valve speed too fast will have vibration or the product shake off; Too slow will reduce the production power, pay attention to our general use of exhaust throttle valve.
       ⑼Screw, slide, in the assembly should pay special attention to the nuts and slide, not slide out of the screw and slide, prevent the ball from falling out of the product or affect the accuracy, in the assembly to ensure the parallelism, straightness and concentricity of the parts in the future, and then the device to prevent unqualified parts in the assembly of the screw and slide fixed deformation resulting in scrap.
       ⑽The feeding part of the material path is mostly determined according to the product, the tolerance zone is about 0.1, which can ensure that the product passes the expired unimpeded in the material path, the feeding direction and the connection of the material path parts need to be bevel Angle of 0.2*30 degrees as the specification, the specific situation depends on the product.
       If the vibration frequency and voltage are adjusted to the maximum, the vibration disk may still be slightly shaken, should check whether the open space between the electromagnet or the steel sheet is loose or broken, the open space in the middle of the electromagnet is suitable between 0.5-1mm, please adjust according to the situation.
       The above is Jeent small editor for everyone collated and published. Jiangsu Jient Intelligent Technology Co., Ltd. is a professional engaged in logistics conveying equipment, Jiangsu Jient intelligent Technology Co., Ltd. is a professional engaged in logistics conveying equipment, non-standard automation equipment manufacturers, products are widely used in: Electronics, household appliances, beverages, food, wood processing and other industries, mainly serving Jiangsu, Huaian, Lianyungang, Suqian and other places, inexpensive, after-sales protection, welcome to inquire! 

Project Factory type conveying equipme… Logistics transportation equip… Non-standard automation equipm…
News Company dynamics Industry dynamics Latest news Q&A
Contact Contact FeedBack
Jiangsu Jiente Intelligent Technology Co., Ltd
Contact: Mr. Yan 18262913779 0527-88860908 fax:0527-84503688
Address: No. 182 Jinjihu Road, Economic Development Zone, Suqian City
宿迁输送设备厂家
Copyright:Jiangsu Jient intelligent Technology Co., LTD Record number:苏ICP备2020069698号-1 技术支持:仕德伟科技 Website Map