Welcome to the official website of Jiangsu Jiente Intelligent Technology Co., Ltd！

Jieent said that the belt driven material elevator transmission belt is generally a rubber belt, which is installed on the lower or upper transmission roller and the upper and lower reversing roller. Chain-driven material elevators are generally equipped with two parallel transmission chains, with a pair of transmission sprockets on the upper or lower side and a pair of reverse sprockets on the lower or upper side. Material lifts are generally equipped with organic housings to prevent dust from flying in bucket lifts. Next, we also want to talk to you about the relevant matters of the material elevator.
(I) Removal of material elevators:
Before the removal operation, the removal unit should check the guide rail frame and wall frame of the material elevator, and then carry out the removal operation after confirming that it is correct.
The demolition unit shall provide a special description of the safety skills of the demolition personnel, and shall have the post certificate of the demolition personnel;
The disassembly operation should first suspend the spreader, and then disassemble the ledges or cable wind ropes and anchor bolts. Suqian conveying equipment manufacturers remind you that in the disassembly process, you must not throw any components.
The removal unit shall formulate a targeted and operable removal plan, which shall be implemented after the approval of the person in charge of the skills of the installation unit and the person in charge of the skills of the general contractor, and after review by the director;
The removal unit shall have the qualifications of mechanical devices and safety production licenses;
A special demolition warning area should be set up and equipped with full-time safety management personnel for supervision.
(ii) Material elevator precautions:
For material elevators that have been in normal working conditions for more than one year or have been shelved for more than 6 months, the operation process should be checked. Suqian transportation equipment manufacturers said that the inspection content should include structural inspection, rated load test and safety device reliability test.
The frame of the derrick type material elevator shall adopt strengthening measures at the opening connected with each stop channel;
The wire rope should be equipped with a maintenance trough, and the ground should not be dragged into or submerged in water;
It is prohibited to use conflict elevators on material elevators.
The above is Suqian conveying equipment manufacturer - Jieent for everyone to sort out and release. Jiangsu Jiente Intelligent Technology Co., Ltd. is a professional engaged in logistics conveying equipment, non-standard automation equipment manufacturers, products are widely used in: electronics, household appliances, beverages, food, wood processing and other industries, mainly serving Jiangsu, Huaian, Lianyungang, Suqian and other places, inexpensive, after-sales support, welcome to inquire!

Related articles

Related products